Semisubmersible chemical pumps АХПН

Full catalogue "CHEMICAL EQUIPMENT" (8 Mb)

АХПН Q/H.1

Pumps АХПН Q/H.1 are vertical semisubmersible centrifugal pumps. They allow the presence in the pumped liquid of solid inclusions with the size up to 2.0 mm and volumetric concentration up to 0,5%. To prevent vapour release, above the support plate, single side sealing and side sealing with double sealing are installed. The flow part of the pumps is made from fluoroplastic Ф-50. Liquid rate range is 1,5-50 m3/hour and pressure is 10-50 m. The pumped liquid density is up to 1800 kg/m3. Minimum temperature of the pumped liquid is up to -85°C, the maximum one is up to 120°C. Immersion depth is up to 2 m. Filter lenth is up to 0.5 m. On special demand of the customer, the pumps with other technical characteristics may be produced (immersion depth, plate size according to the customer drawings, temperature range).

Technical characteristics of АХПН Q/H.1 (9 Mb)

АХПН Q/H.2

Pumps АХПН Q/H.2 are vertical semisubmersible centrifugal pumps. They allow the presence in the pumped liquid of solid inclusions with the size up to 2.0 mm and volumetric concentration up to 0,5%. The immersion depth from the support plate is up to 4 m. On the suction connection, 0.5 m long filter may be mounted. The pumps for aggressive liquids is made with side or gland sealing of the shaft above the support plate. The flow part of the pumps are made in the frame from steel of 304 and 316 L type. Liquid rate range is 3,6-400 m3/hour and pressure is 15-60 m. The pumped liquid density is up to 1800 kg/m3. Minimum temperature of the pumped liquid is up to -20°С, maximum one is up to 105°С.

Technical characteristics of АХПН Q/H.2 (9 Mb)