Full catalogue "CHEMICAL EQUIPMENT" (8 Mb)
The frame is made from carbon (.1), stainless steel 304 (.2) or completely from polymeric materials (.3). Flow part of the valves ВДХ DN/PN.1,2 is lined up with fluoroplastic Ф-4МБ (FEP). Operating temperature is from -50°C to 150°C, PN = 0,6; 1,0; 1,6 MPa.
Technical characteristics of ВДХ DN/PN.1,2,3 (9 Мб)
Rotary chemical gates are made with the diameter from 32 to 2000 mm for pressure PN = 0,6; 1,0; 1,6; 2,5; 4,0 MPa.
Rotary chemical gates ЗПХ DN/6; 10; 16.1...4 have inter-flange version in the frame from carbon steel with flow part:
- Baffle and disk from fluoroplastic Ф-4МБ, the disk may be produced from stainless steel 304 or 316 L (DN = 40-800 mm)
- Baffle is from resin mixtures, disks are lined up with polyethylene of high molecular weight (HMWPE), polypropylene, nylon (DN = 40-1000 mm)
Technical characteristics of ЗПХ DN/PN (9 Мб)
ЗПХ with elastic metallic seal
Rotary chemical gates ЗПХ DN/10; 16; 25.(1...4)(1,2) are flange free, produced in frame from carbon steel (1) or from stainless steel 304 and 316 L (2). Rotary chemical gates ЗПХ DN/10; 16; 25.(1...4)(3,4) are flange version, produced in frame from carbon steel (3) or from stainless steel 304 and 316 L (4).
Technical characteristics of ЗПХ DN610;16.(1…4) (9 Мб)
The frame is made from carbon (.1) or stainless steel 304 (.2), flow part is fluoroplastic Ф-4МБ (FEP), РN = 1,0;1,6 MPa. Temperature range Т = -50°C — 150°C. In case of failure, the valve type should be specified: mushroom or disk. Back flow valve КОХ is protective armature. The main function of the back flow valve is preventing the operating medium flow direction from changing. Chemical back flow valves produced by CJSC "HIMAGREGAT" Group" have maximum acceptable leakage level (DN/25)х3 cm3/min according to the standard ZBJ16006-90.
Technical characteristics of КОХ DN/10,16.1,2 (9 Мб)
Chemical ball valves may be equipped with electric or pneumatic drives. The frame is made from carbon (.1) or stainless steel 304 (.2) or completely from polymeric materials (.3). Metallic valves flow part is fluoroplastic Ф-4МБ (FEP), РN = 0,6; 1,0; 1,6 MPa. Temperature range: Т = -50°C – 150°C.
Technical characteristics of КШХ DN/PN.1,2 (9 Мб)