DEF (Diesel Exhaust Fluid/AdBlue) Submersible Pump Kits

1HP Pump 1 Phase, 60Hz, 208-230V - P/N 100-6100-000 [WITHOUT  THE FLOAT SWITCH]
1HP Pump 1 Phase, 60Hz, 208-230V - P/N 100-6100-010 [WITH THE FLOAT SWITCH]
1HP Pump 3 Phase, 60Hz, 208-230V - P/N 100-6200-000 [WITHOUT  THE FLOAT SWITCH]
1HP Pump 3 Phase, 60Hz, 208-230V - P/N 100-6200-010 [WITH THE  THE FLOAT SWITCH]

RPM - 3450
Duty – 40 AMB
Duty Cycle – Continues duty, greater than 30 start/stop cycles per hour
Pump Diameter – 5in (126mm)
Pump Height – 18 in (455mm)
Pump Weight – 28 lbs. (13Kg)
Column Piping – Schedule 40 Stainless Steel
Operating Temperature Range - +12F to +104F (-11C to +40C)
Seals - Viton
Pump interface – 1.25NPT [1.5NPT and 2NPT adapter available]
Tank Flange Interface – 6” ID minimum for pass through
Max Pressure rating – 45 Psi.
Submersion Requirements – 4”
Tank Bottom Clearance Requirements – 4”
Dry motor
Dynamic cooling system guaranties effective motor cooling and
pump high performance
Hassle free warranty       

Control box, 1HP,  1 phase, 60Hz, 208-230V - P/N 025-6030-010
[with build in overload protection and capacitor]
Control box, 1HP, 3 phase, 60Hz, 208-230V - P/N 025-6050-010
[with build in overload protection] 

CONTROL BOXES FEATURES:
Built in capacitor [single phase only]
Built in dry run protection
Built in lightning strike protection
Overload protection
Automatic power off if overload
Short circuit protection
Overcurrent protection
Block up rotating [three phase only]
Protect against short phase [three phase only]
IP20 ratings
Temperature: from -13F(-25C) to 130F(55C)
Humidity: 20-90% RH

CHA STAINLESS STEEL  INLINE CHECK VALVE
Check Valve -  2” NPT inline.  – P/N 050-6230-125
Check Valve – 1.5” NPT inline  – P/N 050-6230-150
Check Valve – 1.25” NPT inline– P/N 050-6230-200

CHA STAINLESS STEEL PRESSURE RELIEF VALVE
Pressure relief valve -  2” NPT inline – P/N 050-6357-200
Adjustable pressure relief valve 1" [20-45 PSI] – P/N 050-6373-100

CHA ADJUSTABLE PIPE LENGTH KIT
Adjustable length pipe kit 1 ½”-2” NPT [L1]- P/N 050-6128-100
[adjustable length range 70”-105”]
Adjustable length pipe kit 1 ½”-2” NPT [L2] – P/N 050-6135-100
[adjustable length range 105”-165”]